Support for Model: WL12000HE-03/A
| General Information | ||
| Spec Sheet | Operators Manual | Parts List |
| Load Balancing | Tri-Fold Brochure | |
| Drawings | ||
| Outline Drawing | ||
| Engine | ||
| Operators Manual | Shop Manual | Parts List |
| EPA Certificate | ||
| Generator | ||
| Spec Sheet | Operators Manual | |
| Additional Information | ||
| Battery | Dolly Kit Installation Instructions |
Additional Information
| Starting Watts | 12000 |
|---|---|
| Running Watts | 10800 |
| Running Amps | 90/45 |
| Voltage Output | 120/240 Volt Single Phase |
| Voltage Regulation | Capacitor |
| 120V Receptacles | (3) NEMA 5-20R 20A (GFCI) Duplex |
| 120/240V Receptacles | (1) C6365 50A |
| 240V Recpetacles | (1) L6-30R 30A (GFCI) |
| Engine Brand | Honda |
| Fuel | Gasoline |
| Emissions | CSA, CARB/California, EPA Prime |
| Dimensions | 40" x 27.2" x 26.2" |
| Weight | 412 lbs. |
| Unit Warranty | 3 Years Commercial |
| Assembled In | USA |
Share your thoughts!
Let us know what you think...
What others are saying
Call us crazy, but we just want you to get the right generator. We provide, where possible and applicable, our competitors’ model that is comparable with our own. If there isn’t a comparable product, we’ll tell you why.
Question
Bill –
Does the unit charge the starting battery when the engine is running?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Bill,
Yes, the Honda engine has an engine charging system when the engine is running.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Brian –
I was considering one of these (WL1200HE) for home backup thru a transfer switch. Can the neutral be un-bonded?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Dale Riebel –
Brian,
See the operators manual page 11: This WINCO portable generator ships with a bonded
neutral and over-current protection. NFPA 70 refers to this
as a “separately derived system.” When connecting it to a
building, a transfer switch specifically designed for GFCI, and
bonded neutral generators is required. Please consult a licensed electrician for your particular application.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal