Product Features
W3000H
This Lil’ Dog is a perfect portable generator for quick jobs
around the house or as an excellent addition to any
handyman truck.
Honda GC160 Engine
You expect the best, you get the best. The Honda GC160
provides the longevity you expect from Honda.
Low Oil Protection
In the event there is low oil level, the engine will
shut down, protecting the engine from damage.
Powder Coat Paint
For an incredibly durable finish.
Light Weight Generator
When you need a Lil’ helping hand on your worksite,
at 68 pounds, the W3000H/ is easily carried.
100% Load Tested
We load test every generator before it leaves our facility.
Question
Glenn K Rogers –
What is the run time in full tank of fuel
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Admin Josie Krugerud –
The run time is 1.5 hours on full load.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jadon#MrFredYum –
What is the run time on 1/4, 1/2, 3/4, and full load?
Thanks
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Josie Krugerud –
Hello, We only have run time on full load of 1.5 hours. Fuel consumption is 1.3 gal/hr on full load. It is a 2 qt full tank.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Dodge –
Looks like this is the only portable Winco offers with a US made engine. Great job! Can you tell me what db this generator runs at full load?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Josie –
Hello Dodge,
The dba is 72. You can find more information by downloading the spec sheet from the product page.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bruce Hojnacki –
RE Lil Dog 3000 generation with honda engine
The pull cord is locked up. This happened one other time and I recall taking off the generator cap and putting a wrench on the end bolt, moving it around and it became unlocked. This time I pulled the cord twice (normally) and it locked up on the third pull.
ANY INFORMATION ON SUSPECTED CAUSE WOULD BE GREATLY APPRECIATED.
I plan to dissassemble it and try to get it back running again when time permits.
Bruce Hojnacki (727)585-7000
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Bruce, it is unfortunate that you are having an issue with your generator set. Please contact our Technical Support Department @ 507-357-8334 or [email protected]. They will be happy to advise you on your issue.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal