Support for Model: ULPSS8B2W/F
| General Information | ||
| Spec Sheet | Operators Manual | Parts List |
| Tri-Fold | ||
| Drawings | ||
| Outline Drawing | ||
| Engine | ||
| Operators Manual | Parts List | EPA Certificate |
| Generator | ||
| Spec Sheet | Operators Manual | |
| Additional Information | ||
| Battery Charger | Battery | Shock Mounts |
| Circuit Breakers |
Merrill Ballantyne –
Does Winco sell paint to re-coat areas where the powder coat has peeled? I have a very old version of the 8400 watt standby generator and it has peeling paint and the enclosure has rust. Let me know of a source of matching paint.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Josie Krugerud –
Hi Merrill, we do sell touch-up paint. Please call our Parts and Service Department at 507-357-6831 and they will be able to assist you.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Asher –
What kind of oil is used to replace the current oil in this model, or where can I find a downloaded pdf Instructions to find out
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Josie Krugerud –
Hello Asher,
We recommend using our WINCO premium synthetic 5W-30 oil. You can contact our parts department at 507-357-6831 to order. You can find all oil information in the Operators Manual. When on our website, go to the product page, scroll down and click on downloads and a table will appear.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Michael Peterson –
My 2 year old Winco ps88b quits after 5 minutes. Error code is a capital V with an adjacent down arrow. Oil level is full and clear (i.e., new). Service is 120 miles away. Is this something a customer can handle?
More infor: generator is lightly used (only in summer). It’s only been run when I exercise it about once every 2 weeks. I suspect there’s less than 20 hours on it. In the winter I keep it covered and free of snow (battery removed, of course).
Michael
[email protected]
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Glenn Roy –
8.8kW Winco LP gen exhaust manifold has holes in it again after being replaced 1year ago. 192 hours on new manifold.
I need a service rep. Unit in VT.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Josie Krugerud –
Hello Glenn, we are sorry to hear you are having issues with the manifold. To find a dealer/service center in your area, you can use our dealer locator under the “Where to Buy” tab or you can call our service department at 507-357-6831 and they’d be happy to help!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mark Gandulla –
I have a PSS8B generator that’s about 8-10 years old. The generator stopped exercising quite awhile ago and nothing has been touched on the generator or control panel. When I push the start switch up to the start position nothing happened. So i replaced the starter solenoid thinking that was the problem but still the same thing. I tried jumping the solenoid and the engine started up no problem and when I returned the start switch to the auto position the engine shut off. So I though that it might be a bad start switch, so I replaced that. And it still doesn’t start with the switch or exercise. But I can still start it by jumping the solenoid. I checked the two fuses on the panel and they’re fine.
What else can I check, I’m at a loss. I called an electrician to come look at it and he wanted me to sign an annual maintenance contract before he would even look at it.
Any help you could provide I would appreciate.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Josie Krugerud –
Hello Mark,
When in auto, the start/stop switch is controlled by the transfer switch. If the transfer switch sees utility power, it will shut down the unit. It does sound like your generator is repaired. If you have any further questions, please call our Service Department at 507-357-6831.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal