I have winco welder 14 hp Kawasaki engine. I would like to buy a new carburetor something after market. Will Early 14 HP Kawasaki mower carburetors work on my welder generator? Can you recommend a good carburetor or rebuild kit for my 225 Winco welder? Thank you Jerry .
Jerry, here is a link to our engine support page for Kawasaki. There you will find the KF150D-SX parts list for your engine as well as a link for buying Kawasaki engine parts. https://www.wincogen.com/engine-support/#Kawasaki
I have found nothing that crosses over 316550 – old number 6100D . My WG 225 is 581 cc . I would be happy with a carburetor kit or new carburetor. Thank you
Jerry, unfortunately you will find that a lot of the old Kawasaki engine parts are obsolete now days. You may wish to take it to a local small engine shop to see if they can professionally clean the carburetor to get it operational.
The welder ran fine 2 years ago . I’m sure it’s a needle valve the rubber tip the float is good the setting is simple to adjust . The carburetor is flooding that could only be a needle valve or float correct me if I’m wrong .
i have a wg225 model that is not welding , it was working real good, didnt use it for some time and when i went to use it find out that it wasnt’t welding. the generator works fine.
Juan, please contact our Technical Support Department at 507-357-8334 or [email protected]. No parts support for this model exists and troubleshooting knowledge is limited because of the age of the product.
Question
Jerry –
I have winco welder 14 hp Kawasaki engine. I would like to buy a new carburetor something after market. Will Early 14 HP Kawasaki mower carburetors work on my welder generator? Can you recommend a good carburetor or rebuild kit for my 225 Winco welder? Thank you Jerry .
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Jerry, here is a link to our engine support page for Kawasaki. There you will find the KF150D-SX parts list for your engine as well as a link for buying Kawasaki engine parts. https://www.wincogen.com/engine-support/#Kawasaki
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Jerry –
I have found nothing that crosses over 316550 – old number 6100D . My WG 225 is 581 cc . I would be happy with a carburetor kit or new carburetor. Thank you
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Dale Riebel –
Jerry, unfortunately you will find that a lot of the old Kawasaki engine parts are obsolete now days. You may wish to take it to a local small engine shop to see if they can professionally clean the carburetor to get it operational.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Jerry –
The welder ran fine 2 years ago . I’m sure it’s a needle valve the rubber tip the float is good the setting is simple to adjust . The carburetor is flooding that could only be a needle valve or float correct me if I’m wrong .
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Dale Riebel –
Jerry, I would agree that is your issue with the carburetor.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ed Kwiecien –
IS THERE A CONVERSION CARBURETOR THAT CAN BE USED FOR 316550-6100d
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Ed, unfortunately, Winco does not supply Kawasaki engine parts. I would recommend searching the internet.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
juan parr –
i have a wg225 model that is not welding , it was working real good, didnt use it for some time and when i went to use it find out that it wasnt’t welding. the generator works fine.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Dale Riebel –
Juan, please contact our Technical Support Department at 507-357-8334 or [email protected]. No parts support for this model exists and troubleshooting knowledge is limited because of the age of the product.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal