Guy ended up giving me this old winco generator. When I got there he had starting fluid spraying it in the carb. It ran really rough. You never look a gift horse in the mouth. You take it. Took it home poured gas in the carb. Got it running better than what he did. After it warmed up some noticed the 2 bolts (nuts sounded better than bolts) that attach the carb. To the motor were loose. Upon tightening them it ran almost perfect. The years have been hard on her. But I cleaned her up & she’s running just fine. An occasional hiccup or two. But for how old she is she is doing fine. Hold the correct voltage as described in the manual. So I’m conclusion I’d recommend winco over any generator out there . Especially general. Thank you. Pow.r toc h
Thank you for sharing your story! We appreciate you for taking time to get her back up and running. If you ever need technical support or we may perhaps still have a part or two you need, you can contact our service and parts department at [email protected].
Check your nuts
Pow.r toc h –
Guy ended up giving me this old winco generator. When I got there he had starting fluid spraying it in the carb. It ran really rough. You never look a gift horse in the mouth. You take it. Took it home poured gas in the carb. Got it running better than what he did. After it warmed up some noticed the 2 bolts (nuts sounded better than bolts) that attach the carb. To the motor were loose. Upon tightening them it ran almost perfect. The years have been hard on her. But I cleaned her up & she’s running just fine. An occasional hiccup or two. But for how old she is she is doing fine. Hold the correct voltage as described in the manual. So I’m conclusion I’d recommend winco over any generator out there . Especially general. Thank you.
Pow.r toc h
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Josie Krugerud –
Thank you for sharing your story! We appreciate you for taking time to get her back up and running. If you ever need technical support or we may perhaps still have a part or two you need, you can contact our service and parts department at [email protected].
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal