Support for Model: PSS12000/A
12kw Water-Cooled Package Standby System
| General Information | ||
| Operators Manual | Parts List | |
| Generator | ||
| Generator Troubleshooting Guide | ||
| Engine | ||
| Operators Manual | Service Manual | Parts List |
12kw Water-Cooled Package Standby System
| General Information | ||
| Operators Manual | Parts List | |
| Generator | ||
| Generator Troubleshooting Guide | ||
| Engine | ||
| Operators Manual | Service Manual | Parts List |
Question
Guy –
What battery do I use for the model-pss12000A and can I get it at my local NAPA store?
Model Number PSS 12000/A
WATTS 12000 LP/10000 NG
VOLTS 120/240
SERIAL NO: 13750 M97
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Guy,
The operators manual calls out a BCI group size 26 rated at 450 CCA or higher. Yes, your local NAPA should be able to sell you that battery.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Albert –
What battery do I use for PSS12000 model generator
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Albert, the battery requirements are in the operators manual on this page. A 12 volt, BCI group size 26 battery, rated a minimum of 450 CCA or higher is recommended.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Albert –
Where can I get the air filter for PSS12000
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Albert, please call our Parts Department @ 507-357-8332 to order the air filter.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
David Beard –
After engine starts the starter stay engaged to fly wheel. The starter gear won’t retract and engine completely destroy stater internal components.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
David, please contact our Technical Support Department at 507-357-8334 or [email protected].
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Gersom –
12000/A
I would like to 2wire start my 25yr old Winco/Onan genset. Is this possible?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Gersom, your model is already a 2-wire start generator. For additional support please contact our Technical Support Department @ 507-357-8334 or [email protected].
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal