Support for Model: PSS10H/B
10kw Air-Cooled Package Standby System
General Information | ||
Operators Manual | Parts List | |
Generator | ||
Operators Manual | Generator Troubleshooting Table |
10kw Air-Cooled Package Standby System
General Information | ||
Operators Manual | Parts List | |
Generator | ||
Operators Manual | Generator Troubleshooting Table |
Question
Pete –
Hi. Is an outside ATS available for model PSSO1H/B ?
Generator “runs like a top”
Thanks
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Pete,
You can by an ASCO 185 series transfer switch that is rated for outdoor use. Please call our Sales Department @ 800-733-2112.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
william –
where to get the battery. mine is over 7 years. does any one know what to ask?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
William,
In the operators manual it specifies a 12 volt battery, BCI group size U1, rated a a minimum 235 CCA (cold cranking amps). You can buy one with a larger CCA if you wish. Any automotive parts store should carry such a battery.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tom Bennett –
where can I get a set of diodes and varistor for my PSS10H/B? I have found the 300323-207 but not the 300323-107 and the 300323-208 but not the 300323-108. Are they the same part for the 10 and 12 or can you help me obtain the correct replacement parts.
Thank you
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Tom, please call our Parts Department @ 507-357-8332. You can order the parts directly from them. Thanks, Dale.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal