Support for Model: HP7500/A

Winco High Performance Portable 7.5kw Generator

Share your thoughts!

Let us know what you think...

What others are saying

  1. Robert brown

    Robert brown

    How many amps does the 750 produce

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Dale Riebel

      Admin Dale Riebel

      Hi Robert. The HP7500/A model is a 7500 watt generator. Watts divided by volts = amps. So in this case, 7500 divided by 240 volts = 31.25 amps.

      Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Danny amrit

      Looking for the pull cord revoil assembly for this unit.it have a square thing that goes into the shaft .any links to dind this part wuld be very much appreciated

      Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Dale Riebel

      Dale Riebel

      Danny,
      We do not stock that engine part. You can call our Service Department @ 507-357-6831, or contact your local Briggs & Stratton dealer for that items availability.

      Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Question

    gary scheall

    We have a winco generator hp 7500,we do not it, Who can we give it to. we live cleveland,ohio . It dose not run.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Question

    Keith Simon

    Do you have a plumbing diagram for the LP side of a dual fuel system? I have from the diaphragm to the carb connected but need to connect to the diaphragm.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Continue as a Guest