I am looking for a website or a phone number to be able to call and order parts for a PTO powered generator I own. I have model# and part # . Please point me in correct direction .
I just bought this unit at a farm auction. How do I get a manual? Shows good voltage on the gage, no output (have only half messed with it so far, only the 120/230 side, meter to outlets is next).
I have a 25/15PT2. It used to produce enough power to run a small farm. It now drops the field just trying to start a home ac system even with all other significant energy users shut down. Just wondering if you could point me in the right direction as to which part may be defective. Possibly a rectifier or diode? It seems to have just gotten week. Thanks!
What is the TDH for a Winpower 25/15 single phase? With electronic controls on most appliances I want to be avoid damaging them. Are parts still available for that model?
Mark, Total Harmonic Distortion was not recorded when your model was built. Most appliances should work with your model, although we have seen some furnaces are more sensitive to harmonic distortion. You may want to consider having an electrician install a voltage surge suppression device to protect against voltage surges when using the generator. Parts are limited because of the age of the generator. Please email [email protected] if you need a quote on parts.
Joe, you would get the wire from a local electrician. We sell the connectors that connect to the wire. Please call our Parts Department @ 507-357-8332 if you wish to order them.
New generators use 4-wire receptacles, cords, and plugs. How do I use the 3 prong receptacle on a 25/15PT2 to provide backup power to my house? Can I replace it with a 4-prong receptacle?
Hello, I just bought a Winpower PTO Generator, 35/20 kW, #1729-25, stamped in Generator under the alu-specs-Label. What year is this unit manufactured ? I couldn’t find this number in yourGeneral Information 1952-1987. Thanks for info. George, Edgewood, Canada.
Melisa mccombs –
I am looking for a website or a phone number to be able to call and order parts for a PTO powered
generator I own. I have model# and part # . Please point me in correct direction .
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Admin Dale Riebel –
Hi Melisa. You can order parts directly from our Service Department @ 507-357-6831. They will be glad to help you with that. Thanks.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Sean Davis –
I just bought this unit at a farm auction. How do I get a manual? Shows good voltage on the gage, no output (have only half messed with it so far, only the 120/230 side, meter to outlets is next).
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Admin Dale Riebel –
Sean,
The manuals and troubleshooting are on this page under “Product Downloads”.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
André Dubé –
I didn’t find what kind of oil you use in the PTO gear train?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Hello Andre. You can use 85 or 90 weight gear oil.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Rodney Hanson –
I have a 25/15PT2. It used to produce enough power to run a small farm. It now drops the field just trying to start a home ac system even with all other significant energy users shut down. Just wondering if you could point me in the right direction as to which part may be defective. Possibly a rectifier or diode? It seems to have just gotten week.
Thanks!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Rodney,
Please use our Dealer Locator to find your closest Winco Dealer. They would be best to determine if your generator is functioning properly.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mark –
What is the TDH for a Winpower 25/15 single phase? With electronic controls on most appliances I want to be avoid damaging them.
Are parts still available for that model?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Mark, Total Harmonic Distortion was not recorded when your model was built. Most appliances should work with your model, although we have seen some furnaces are more sensitive to harmonic distortion. You may want to consider having an electrician install a voltage surge suppression device to protect against voltage surges when using the generator. Parts are limited because of the age of the generator. Please email [email protected] if you need a quote on parts.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Joe Meiller –
Where can I buy a 4 wire cord with #1 wire to hook up my 27 kw pto generator to my transfer box
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Joe, you would get the wire from a local electrician. We sell the connectors that connect to the wire. Please call our Parts Department @ 507-357-8332 if you wish to order them.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Nolan Swenson –
New generators use 4-wire receptacles, cords, and plugs. How do I use the 3 prong receptacle on a 25/15PT2 to provide backup power to my house? Can I replace it with a 4-prong receptacle?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Question
Michel Daoust –
I need the part number of the gearbox bearings for the 25/15pt2 the ones for the pto shaft
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Michael, please contact our Parts Department @ 507-357-8332 or [email protected].
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
George John Burgin –
Hello, I just bought a Winpower PTO Generator, 35/20 kW, #1729-25, stamped in Generator under the alu-specs-Label.
What year is this unit manufactured ? I couldn’t find this number in yourGeneral Information 1952-1987. Thanks for info. George, Edgewood, Canada.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
George, there should be letters before the numbers. Please provide those letters. Thanks.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Lonnie dallegge –
Got a 25000 alt. Needs. Enerezed
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal