I just purchased this model generator. Is there a way to find out the age of the unit? Model: 20PTOF-3/0 Serial: 30709A5. Winco PTO generator on trailer. Thank you,
Denis, yes, it is fine to operate it with 30 hp at the PTO, knowing that you should not load the generator more than 15,000 watts. The ratio is approximately 2 to 1, hp to output.
Question
Caleb Mahlstedt –
Is there a way to get the original paint color to re-paint an older unit?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Caleb, we do not have the original paint for your model. I would recommend matching it and buying the paint locally.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Dean Hambly –
I just purchased this model generator. Is there a way to find out the age of the unit? Model: 20PTOF-3/0 Serial: 30709A5. Winco PTO generator on trailer. Thank you,
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Dean, A5 stands for April 1965 or 1975. I could not find 30709 serial number in our archives.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Dean Hambly –
Thank you, SN could be 307094A5?? Is that too many numbers before the A5?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Dale Riebel –
You’re welcome. The serial number would be five numbers followed by the date code.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Dénis Larochelle –
What hp is required to run that generator and what speed Rpm?
Serial 24829n6. What year would it be
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Denis, you need 40 horsepower at the PTO of the tractor to operate your model. 540 rpm PTO input speed.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Denis Larochelle –
If tractor pto delivering 30 hp pto with the 20PTOF- 3/A run and be ok knowing
The this would give about 13500 watt
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Denis, yes, it is fine to operate it with 30 hp at the PTO, knowing that you should not load the generator more than 15,000 watts. The ratio is approximately 2 to 1, hp to output.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal