I found a used Winco 35PTOC-3/C that hasn’t been used in 20+ years …. Looks good but…. What probocould it have setting that long ? It is stored inside but is very dusty looking
Robert, it is obsolete. We have a conversion kit for your model that replaces the receptacle on the generator and provides one male plug kit as well. 61201-102 is the part number. Please call our parts department to place an order at 507-357-8332.
Question
Norman Hellebusch –
Is this generator big enough to power a house with a 200 amp panel ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Norman, please contact our Technical Support Department at 507-357-8334 or [email protected].
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Darwin Pringle –
How many what’s is this unit
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Darwin, it is 35,000 watts.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bill Blum –
Does this generator use a 540rpm input shaft? Thank you
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Bill, yes your model is a 540 RPM input.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Bob G –
I found a used Winco 35PTOC-3/C that hasn’t been used in 20+ years …. Looks good but…. What probocould it have setting that long ? It is stored inside but is very dusty looking
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Dale Riebel –
Bob, please call our Technical Support Department at 507-357-8334 with questions about possible issue with it.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Robert Gray –
I’m looking for a male plug that plugs in this generator for the big plug. Looks like three round
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Robert, it is obsolete. We have a conversion kit for your model that replaces the receptacle on the generator and provides one male plug kit as well. 61201-102 is the part number. Please call our parts department to place an order at 507-357-8332.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal