Support for Model: W15PTOS/E
15kw PTO Generator
| General Information | ||
| Operators Manual | Gearcase Parts List | |
| Generator | ||
| Operators Manual | Troubleshooting Guide | Troubleshooting Table |
15kw PTO Generator
| General Information | ||
| Operators Manual | Gearcase Parts List | |
| Generator | ||
| Operators Manual | Troubleshooting Guide | Troubleshooting Table |
Question
Michael Maliga –
Looking for the wiring diagram for W15PTOS/E that shows the interconnection of the capacitors. Nameplate and Capacitor wiring is in the pictures, but it seems both leads from the generator are connected to the same terminal, and the last capacitor is only connected on one side.
I have looked through all of the informatioon on the website, and I can only find sections of the wiring. The Mecc Alte manual doesn’t seem to show any of the generator wiring.
Can you help?
Mike
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Mike, I emailed you a picture.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Troy Hebert –
I bought this model, had it for 9 years, this year I noticed the voltage coming out is only 102v. With 63 cycles, what do you think is the problem?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Troy, most likely a bad capacitor. There are three of them in your model, one 31.5uf and two 35uf. You can check the capacitance with a meter. They should be +/- 5% of the rating.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Dale Riebel –
Troy, please call our Parts Department @ 507-357-8332 to order parts.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal