Product Features
Starting at 31,600 standby watts, this 30PTO is three phase
with a 540RPM gearcase.
Rugged Design
Our own WINCO gearcases have proven their strength
and durability for over 60 years and will keep doing so
into the future.
Low Harmonic Distortion
Provides clean power for both farm and home.
Frequency Meter
A large 3 1/2″ frequency meter ensures the proper output.
Premium Circuit Breakers
Providing clear and instant identification of a tripped circuit.
Protective PTO Shield
Safety is always a priority.
5-Wire Anderson Full Power Plug Included
100% Load Tested
You won’t find statistical sampling here. We load test every
generator before it leaves our facility.
Question
Norm –
How many amps are allowed on the neutral leg?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Norm, please contact our Technical Support Department @ 507-357-8334 or [email protected]. They will be happy to assist you.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mark –
I have a Miller CP300 3 phase welder. If this generator was connected to a breaker panel would it handle a welder? It would not be a steady load as the welder would only need to draw a large load when actually welding.
Thank you
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Mark, please contact our Technical Support Department @ 507-357-8334 or [email protected].
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal